MEC-Elva Smart VSD Booster Pump
Compact constant-pressure water boosting for homes, storage tanks and gardens. Choose Lite for local control or Max with Wi-Fi and Bluetooth.
- Permanent-magnet synchronous motor with built-in variable-speed control.
- Four models covering 370–900 W, selected by required flow and pressure.
- Lite for local operation; Max adds Wi-Fi and Bluetooth.
- Integrated 1.5 L pressure tank and same-side 1-inch inlet/outlet connections.
- IP55 protection, Class F insulation and controller protection functions.
MEC-Elva Smart Constant-Pressure Booster
The RAFSUN MEC-Elva combines a permanent-magnet motor, variable-speed drive and pressure control in a compact all-in-one housing. It is designed for household water supply, pressure boosting, gardens and small building installations where a compact pump and steady pressure are important.
Choose the control experience you need
Lite
Local constant-pressure control with the built-in display. No Wi-Fi, Bluetooth or Pump Link.
Max
Adds Wi-Fi and Bluetooth for compatible app control and monitoring. Adjust pressure, view operating readings and water temperature, receive fault alerts, and review energy-use history in the compatible app.
Designed around installation and service
The integrated pressure tank, accessible pipe connections, split housing/controller arrangement and semi-transparent flip cover support a compact installation and access for maintenance. Confirm the required impeller material and electrical version with your quotation.
Protection for everyday operation
The controller includes soft start/stop, water-shortage protection, overcurrent and stall protection, input over/undervoltage protection, overheating protection and sensor warnings. Protection functions do not replace correct priming, electrical protection or installation.
MEC-Elva Model Comparison
| Model | Power | Max. flow (m³/h) | Max. head (m) | Rated flow (m³/h) | Rated head (m) | L × W × H (mm) |
|---|---|---|---|---|---|---|
| MEC-300 | 370 W | 3.8 / 16.7 US gpm | 30 | 1.5 | 18 | 288 × 175 × 280 |
| MEC-400 | 550 W | 4.2 / 18.5 US gpm | 36 | 2 | 20 | 288 × 175 × 280 |
| MEC-550 | 750 W | 4.8 / 21.1 US gpm | 48 | 2.5 | 30 | 358 × 175 × 280 |
| MEC-750 | 900 W | 5.5 / 24.2 US gpm | 55 | 3 | 30 | 358 × 175 × 280 |
Rated flow and rated head form the catalogue duty point. Maximum flow and maximum head are separate limits, not a simultaneous operating point. Model names are product identifiers: for example, MEC-750 is listed with 900 W power.
Electrical and installation data
- Single-phase, 50/60 Hz.
- Voltage option 1: 165–260 V AC. Voltage option 2: 95–145 V AC. Choose the electrical version to match your local supply and follow the pump nameplate.
- Nominal inlet × outlet: 1 inch × 1 inch on all four models. Confirm thread standard.
- Catalogue maximum suction lift: 8 m (26.2 ft); actual capability depends on site conditions and pipework.
- Clean water: above 3°C and below 75°C (above 37.4°F and below 167°F); ambient temperature 0–40°C (32–104°F).
- Maximum speed: 5,200 r/min. Protection: IP55. Insulation class: F.
Choose a pump by its performance curve at the required total head. Floor count and number of taps alone are not a complete sizing method.
Where MEC-Elva Fits
- Homes and small apartment buildings: pressure boosting matched to simultaneous water demand.
- Storage and rainwater tanks: clean-water supply within the selected model’s operating limits.
- Shallow wells: use only where actual suction conditions are suitable.
- Gardens and greenhouses: match flow and pressure to the irrigation equipment.
- Municipal supply: installation only where permitted and in accordance with local requirements.
MEC-Elva FAQs
How do I choose the right MEC-Elva model?
Choose by the flow required at your total operating head. Send your water source, available inlet pressure, elevation, pipework and simultaneous demand. Maximum flow and maximum head cannot be used as one operating point.
What is the difference between Lite and Max?
Lite provides local constant-pressure control. Max adds Wi-Fi and Bluetooth for compatible Smart Life app control and monitoring. Choose the version before ordering.
Does MEC-750 mean a 750 W pump?
No. MEC-750 is a model name; its listed power is 900 W. MEC-300, MEC-400 and MEC-550 are listed at 370 W, 550 W and 750 W respectively.
Can I order a version for 110–120 V or 220–240 V supplies?
The catalogue lists 95–145 V AC and 165–260 V AC supply options, single-phase, 50/60 Hz. Confirm the electrical version for your local supply when ordering and follow the pump nameplate.
Does the pump need filling before the first start?
Yes. Fill the pump body with clean water and securely refit the filling screw before starting. Seal the pipe connections and follow the installation guide. Do not run the pump without water.
Can it draw water from a tank or shallow well?
The catalogue lists a maximum suction lift of 8 m. Actual suitability depends on the water level, inlet pipe losses, temperature and site conditions. Send the lowest water level and pipe layout so we can check the installation.
What water and temperature conditions are suitable?
Use clean water above 3°C and below 75°C, with ambient temperature 0–40°C. The manual specifies pH 6.5–8.5, solids below 0.1% by volume and particles smaller than 0.2 mm. Drain the system when ambient temperature falls below 4°C to prevent freezing.
What information should I send for a quotation?
Send your model or required duty point, quantity, country, supply voltage and Lite or Max preference. Include thread and plug requirements, plus any OEM packaging or market documentation needs.
Find Your MEC-Elva Configuration
Send your country, required flow and pressure, water source, supply voltage, quantity and preferred Lite or Max version. We will help match the model and configuration to your installation or distribution range.