
DC RPM Series Solar Booster Pump
RPM DC solar pump. Solar surface pumping for larger water-transfer flow. Select from 4 catalogue models covering 550–1,500 W.
- Solar surface pumping for larger water-transfer flow.
- 4 listed models; 550–1,500 W.
- Matched DC solar controller with MPPT.
- Model selection by required flow at total dynamic head.
- Connection and supply configuration confirmed with your quotation.
RPM DC Solar Pump Overview
The RAFSUN RPM DC range supports irrigation distribution and transfer between water sources and storage. Check the pipe diameter and friction losses, especially on long discharge lines; a high maximum flow does not guarantee that flow at your operating head.
The matched DC controller uses available photovoltaic power to run the pump. Solar output varies with irradiance and array configuration. This DC-only selection does not provide night operation from solar panels alone. For AC backup, choose a separately specified hybrid pump/controller package.
Installation checks
Provide the lowest source-water level, suction-pipe length and diameter, discharge elevation and required outlet pressure. Install the surface pump on a suitable base, prime it as specified and make the suction pipe airtight. Do not run dry or assume a universal suction-lift rating. Confirm water quality and any solids before selection.
Compare the full solar surface pump range to choose the required hydraulic and power configuration.
RPM DC Model Selection
| Model | Power (W) | Rated DC voltage (V) | Max. flow (m³/h) | Max. head (m) | Inlet × outlet (inch) |
|---|---|---|---|---|---|
| RPM-6-25-48-550 | 550 | 48 | 6 / 26.4 US gpm | 25 / 82.0 ft | 1 × 1 |
| RPM-21-15-72-750 | 750 | 72 | 21 / 92.5 US gpm | 15 / 49.2 ft | 2 × 2 |
| RPM-27-15-72-1100 | 1100 | 72 | 27 / 118.9 US gpm | 15 / 49.2 ft | 2 × 2 |
| RPM-55-17-110-1500 | 1500 | 110 | 55 / 242.2 US gpm | 17 / 55.8 ft | 3 × 3 |
Maximum flow and maximum head are separate limits, not a simultaneous operating point. Select the pump using its performance curve at your required total dynamic head. Secondary US units are rounded conversions.
PV array matching
- 48 V model: catalogue Vmp guidance 48–96 V; array open-circuit voltage must remain below 105 V.
- 72 V model: catalogue Vmp guidance 72–144 V; array open-circuit voltage must remain below 160 V.
- 110 V model: catalogue Vmp guidance 110–192 V; array open-circuit voltage must remain below 210 V.
The catalogue recommends PV rated power of at least 1.3 × pump power. Check the actual controller supplied, cold-weather array Voc, panel characteristics and cable losses before wiring.
RPM DC Applications
- Water transfer: fill storage tanks at a verified flow and total head.
- Irrigation: match the pump to the required distribution pressure and daily water demand.
- Distributor and installer supply: specify the pump, controller, electrical version and connection requirements together.
Product FAQs
How do I select the right model?
Check the pipe diameter and friction losses, especially on long discharge lines; a high maximum flow does not guarantee that flow at your operating head. Maximum flow and maximum head cannot be used as one duty point. Send the installation details for a curve-based selection.
Can the pump run at night?
Solar panels alone do not power this DC pump at night. Plan the pumping schedule and storage capacity around solar availability, or ask for a matched AC/DC alternative.
How many solar panels do I need?
The catalogue starts from PV rated power of at least 1.3 times pump power. Panel count and wiring also depend on Vmp, cold-weather Voc, the supplied controller and local solar conditions. Send the panel data sheet for matching.
Request RPM DC Pump Selection
Send your country, daily water requirement, required flow and pressure, suction conditions, delivery height, pipe length and quantity. Include panel Vmp/Voc and AC supply details where applicable so we can match the pump and controller before quoting.