Skip image slider
DC RPM Series Solar Booster Pump
DC RPM Series Solar Booster Pump

DC RPM Series Solar Booster Pump

RPM DC solar pump. Solar surface pumping for larger water-transfer flow. Select from 4 catalogue models covering 550–1,500 W.

  • Solar surface pumping for larger water-transfer flow.
  • 4 listed models; 550–1,500 W.
  • Matched DC solar controller with MPPT.
  • Model selection by required flow at total dynamic head.
  • Connection and supply configuration confirmed with your quotation.
Products Categories
Get A Free Quote
Contact Form

RPM DC Solar Pump Overview

The RAFSUN RPM DC range supports irrigation distribution and transfer between water sources and storage. Check the pipe diameter and friction losses, especially on long discharge lines; a high maximum flow does not guarantee that flow at your operating head.

4Catalogue models
550–1,500 WPump power range
MPPTMatched DC controller

The matched DC controller uses available photovoltaic power to run the pump. Solar output varies with irradiance and array configuration. This DC-only selection does not provide night operation from solar panels alone. For AC backup, choose a separately specified hybrid pump/controller package.

Installation checks

Provide the lowest source-water level, suction-pipe length and diameter, discharge elevation and required outlet pressure. Install the surface pump on a suitable base, prime it as specified and make the suction pipe airtight. Do not run dry or assume a universal suction-lift rating. Confirm water quality and any solids before selection.

Compare the full solar surface pump range to choose the required hydraulic and power configuration.

RPM DC Model Selection

Model Power (W) Rated DC voltage (V) Max. flow (m³/h) Max. head (m) Inlet × outlet (inch)
RPM-6-25-48-550 550 48 6 / 26.4 US gpm 25 / 82.0 ft 1 × 1
RPM-21-15-72-750 750 72 21 / 92.5 US gpm 15 / 49.2 ft 2 × 2
RPM-27-15-72-1100 1100 72 27 / 118.9 US gpm 15 / 49.2 ft 2 × 2
RPM-55-17-110-1500 1500 110 55 / 242.2 US gpm 17 / 55.8 ft 3 × 3

Maximum flow and maximum head are separate limits, not a simultaneous operating point. Select the pump using its performance curve at your required total dynamic head. Secondary US units are rounded conversions.

PV array matching

  • 48 V model: catalogue Vmp guidance 48–96 V; array open-circuit voltage must remain below 105 V.
  • 72 V model: catalogue Vmp guidance 72–144 V; array open-circuit voltage must remain below 160 V.
  • 110 V model: catalogue Vmp guidance 110–192 V; array open-circuit voltage must remain below 210 V.

The catalogue recommends PV rated power of at least 1.3 × pump power. Check the actual controller supplied, cold-weather array Voc, panel characteristics and cable losses before wiring.

RPM DC Applications

  • Water transfer: fill storage tanks at a verified flow and total head.
  • Irrigation: match the pump to the required distribution pressure and daily water demand.
  • Distributor and installer supply: specify the pump, controller, electrical version and connection requirements together.

Product FAQs

How do I select the right model?

Check the pipe diameter and friction losses, especially on long discharge lines; a high maximum flow does not guarantee that flow at your operating head. Maximum flow and maximum head cannot be used as one duty point. Send the installation details for a curve-based selection.

Can the pump run at night?

Solar panels alone do not power this DC pump at night. Plan the pumping schedule and storage capacity around solar availability, or ask for a matched AC/DC alternative.

How many solar panels do I need?

The catalogue starts from PV rated power of at least 1.3 times pump power. Panel count and wiring also depend on Vmp, cold-weather Voc, the supplied controller and local solar conditions. Send the panel data sheet for matching.

Request RPM DC Pump Selection

Send your country, daily water requirement, required flow and pressure, suction conditions, delivery height, pipe length and quantity. Include panel Vmp/Voc and AC supply details where applicable so we can match the pump and controller before quoting.

Related Products

Related News

Scroll to Top

Talk to RAFSUN About Your Pump Requirements

Rafsun Solar Water Pump-0

Get A Free Quote Now !

VSD Contact Form

Contact Rafsun to get the service for free

RAFSUN flagship inverter booster pumps product lineup for factory direct sales, featuring BWD Cullinan (900–2200W), BWE Bentayga (750–1500W), RUC Urus (370–1100W), and REB Huracan (370–750W). These high-efficiency RAFSUN Inverter Booster Pumps deliver constant water pressure, energy savings, and reliable performance for residential, commercial, and multi-story building applications.

Get A Free Quote Now !

VSD Contact Form